How to Make Distilled Water

Distilled water is very easy to make, and there are several methods used to make it at home. When you remove the minerals and chemicals from the water, you make distilled water. People make distilled water for a variety of uses, including drinking, watering plants, filling humidifiers, steam irons and even fish tanks, aquariums and etc.

EditSteps

EditDistill Tap Water with a Glass Bowl

  1. Fill a 5-gallon (18.927 L) stainless steel pot about halfway full with tap water.
    Distilled tap water Step 1.png
  2. Place a glass bowl in the water. Be sure it floats. The bowl should not touch the bottom of the pot.
    Distilled tap water Step 2.png
    • If the bowl doesn't float, remove it from the water and set a round baking rack on the bottom of the pot. Then place the bowl back in the water
  3. Watch the water collecting in the bowl. This water should be hot but should not boil. If the water begins to boil, turn down the heat on the stove.
    Distilled tap water Step 3.png
  4. Create a condensation effect with a hot/cold barrier. You can do this by inverting the pot's lid and filling it with ice. When hot steam hits the cold lid, it will create condensation.
    Distilled tap water Step 4.png
  5. Boil the water in your pot. As the water continues to boil, it will cause steam to rise and condense on the pot's lid. The condensation will drip into the bowl. Allow the distillation process to continue until you have enough distilled water in the bowl for your needs.
    Distilled tap water Step 5.png
  6. Remove your pot from the heat and take off the lid.
    Distilled tap water Step 6.png
  7. Take the bowl of distilled water out of the pot of boiling water. Use caution when doing this so you do not burn yourself. You can allow the water to cool before removing the bowl, if you prefer.
    Distilled tap water Step 7.png
  8. Allow the distilled water to cool before storing it.
    Distilled tap water Step 8.png

EditDistill Tap Water with Glass Bottles

  1. Get 2 glass bottles for making distilled water. This process works best if at least 1 of the bottles curves outward from the neck, preventing the distilled water from sliding back into the other bottle.
    Distilled tap water ,BOTTLE Step 9.png
  2. Fill 1 bottle with tap water. Stop filling about 5 in (12.7 cm) from the top.
    Distilled tap water ,BOTTLE Step 10.png
  3. Join the 2 bottles together at the neck and secure them tightly with duct tape.
    Distilled tap water ,BOTTLE Step 11.png
  4. Use a 5-gallon (18.927 L) stainless steel pot of boiling water to distill the water. You want just enough water to cover the bottle filled with tap water.
    Distilled tap water ,BOTTLE Step 12.png
  5. Tilt the bottles at about a 30-degree angle, leaning the top, empty bottle on the inside of the pot's rim. The angle makes it easier to collect the evaporated distilled water.
    Distilled tap water ,BOTTLE Step 13.png
  6. Rest an ice pack or a bag of ice on top of the bottle on top. This will create a hot/cold barrier, causing the evaporation of water in the filled bottle to condense into the cooler bottle.
    Distilled tap water ,BOTTLE Step 14.png
  7. Continue the distillation process until you collect enough distilled water in the bottle for your needs.
    Distilled tap water ,BOTTLE Step 15.png

EditConvert Rainwater to Drinking Water

  1. Put a large, clean container outside to catch the rainwater.
    Distilled tap water ,CONVERT Step 16.png
  2. Leave the container outside for 2 full days to allow the minerals to dissipate.
    Distilled tap water ,CONVERT Step 17.png
  3. Store the distilled water in clean jugs.
    Distilled tap water ,CONVERT Step 18.png

EditVideo

EditTips

  • Lift the inverted lid occasionally to be sure that the steam water is collecting into the bowl.
  • If you think the tap water is not pure enough, it is safer to use distilled water in your saltwater aquarium. You must mix the distilled water with a saltwater mix before adding the solution to your tank.

EditWarnings

  • Only the water in the bowl or bottle will have distilled water. The remaining water will contain all the impurities you removed from the distilled water.
  • You will need to add the appropriate chemicals to distilled water to support aquatic life before using it in your fish tank or aquarium. Without these chemicals, the distilled water will not be able to support life.
  • Make sure that certain glass bowls and bottles can withstand boiling water.
  • Drinking distilled water will over time strip the body of minerals and diminish health, so when distilling water for drinking, be sure to add mineral drops. Distilling water will remove thousand of contaminants such as pharmaceuticals and heavy metals, but it also removes the minerals that are essential to health.

EditThings You'll Need

  • 5-gallon (18.927 L) stainless steel pot
  • Tap water
  • Glass bowl
  • Round baking rack
  • Pot lid
  • Ice
  • 2 glass bottles
  • Duct tape
  • Ice pack or a bag of ice
  • Large container
  • Rainwater
  • Jugs

EditRelated wikiHows



from How to of the Day http://ift.tt/1PHij8N
via IFTTT
Share this article :

Yorum Gönder

 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. Teachpedia - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger